TMS 402-2022 Masonry Code: Changes and How They Can Help You Today
by Richard Bennett, Ph.D., P.E.
July 23, 2024; 11:00 AM - 1:00 PM Pacific Time
Small Business System Requirements FAQ Register
ICC Preferred Provider Course Number: 41236
Seminar Description
The masonry design standards, TMS 402/602 Building Code Requirements and Specification for Masonry Structures were updated in 2022 following a 6-year revision cycle. Learn the major changes in these standards which include a complete rewriting of the veneer provisions, the introduction of compression-controlled sections in strength design, anchor bolt recalibration to be based on the ultimate strength of steel, and the addition of an appendix on masonry reinforced with GFRP (Glass Fiber Reinforced Polymer) bars. These changes and many more will be discussed, and the impact of the changes on typical designs will be reviewed.
Speaker Bio
Richard Bennett, Ph.D., P.E. is a professor of Civil and Environmental Engineering at the University of Tennessee, Knoxville. He has been heavily involved in the TMS 402/602 Building Code Requirements and Specifications of Masonry Structures. He was the main committee chair of the 2016 edition and is vice chair for the 2022 and 2028 edition. He is a co-author of Strength Design of Masonry and is the editor for the 2022 edition of the Masonry Designer’s Guide. He was recently named an Honorary Member of The Masonry Society.
Registration Information
1 Connection | 2 Connections | 3 Connections | 4 Connections | 5 Connections | > 5 Connections | |
Early Registration Discounted Fee* |
$260 | $460 | $585 | $640 | $725 | $130 per connection |
Regular Fee | $275 | $490 | $630 | $700 | $800 | $145 per connection |
* Registration on or before July 21, 2024 |
Please note a single registration allows you to have one connection. However, a number of people can view and listen to the seminar using one connection by using an LCD projector (or a large computer monitor) and good computer speakers or a speaker phone.
All attendees, irrespective of the number of registered connections, can earn 0.2 Continuing Education Units (CEUs) or 2.0 professional development hours (PDHs). CEU/PDH certificates are provided free of charge.
Small Business Registration
We provide discounted registration for small businesses. If you are not registered with us as a small business yet, please click below for more information.
FAQ
- A connection is defined as a single web connection plus a single telephone connection (if necessary). If you want to sign up for more than one connection for this seminar, you will have the opportunity to do so after placing the seminar in your cart.
- A $15 fee will apply if the seminar registrant wishes to revise the web seminar registration (e.g. switch from one web seminar to another).
- Refunds are limited to 80 percent of fee and must be applied for in writing WITHIN THIRTY DAYS after the scheduled seminar.
- We are a registered provider for continuing education in the State of Florida (Provider # 4732), the State of New York (Provider # 99), the State of New Jersey (Provider # 24GP00014200), the State of Maryland, and for the Structural Engineers Certification Board (SECB) of the National Council of Structural Engineers Associations (NCSEA).